Multi-Way Ball Valves
Floating or Trunnion mounted design

Multi-Way Ball Valves

Trunnion mounted design

The trunnion mounted multi-way Ball Valves are equipped with a 2-component or 3-component body. Springloaded seats are used for sealing. Due to the absorption of force by the trunnion and stem the trunnion mounted Ball Valve not only has less torque than the floating versions, but is also suitable for larger sizes and higher pressure levels. The ball and stem are made in one piece, so that even with a high switching frequency, no slackness and resulting wear can occur on these components’ connectors. The balls are equipped with different bores (e.g. L, T or X) depending on the model, so customized solutions for the distribution of media are available.

Info sheet

  • According to DGRL or international standards, such as ASME B16.34 or API 608
  • Soft sealing
  • 2- or 3-piece body
  • L – or T-bore
  • TA-Air proved according to VDI 2440 and Fugitive Emission DIN ISO 15848-1
  • Anti-blow out stem and Anti-static device
  • Actuator connection according to DIN/ISO 5211
  • Flange connection according to DIN/ASME/JIS, butt-weld-ends or according to customer requirement
  • 100% Pressure and tightness test according to various international Standards
  • 100% Function test

Our ball valves can be adapted virtually to any customer request.

Here are a few examples:

  • Transflow or non-transflow
  • Special materials
  • Heating jacket
  • Painting according to customer requirements
  • Special tests such as PMI, cryogenic, fire-safe, helium leak and dye penetrant test DPE
  • Different kind of spring loaded seat design either by coil springs (standard or dust protected), plate springs or Graphite pre-loaded

Are you looking for a special ball valve?

Our skilled sales team will be pleased to advise you on any technical options.

MULTIWAY BALL VALVES

Floating design

The 3-way Ball Valves with a floating ball are designed with a 2-component or multi-component body. The floating ball design creates tightness on the downstream side, which keeps increasing as the up-stream pressure continues to rise. The balls are available with an L or T bore.

Info sheet

  • According to DGRL or international standards, such as ASME B16.34 or API 608
  • Metal-, carbon- or soft sealing
  • 2- or 3-part body
  • L – or T-bore
  • TA-Air proved according to VDI 2440 and Fugitive Emission DIN ISO 15848-1
  • Anti-blow out stem and Anti-static device
  • Actuator connection according to DIN/ISO 5211
  • Flange connection according to DIN/ASME/JIS, butt-weld-ends or according to customer requirement
  • 100% Pressure and tightness test according to various international Standards
  • 100% Function test

Our ball valves can be adapted virtually to any customer request.

Here are a few examples:

  • transflow or non-transflow
  • Special materials
  • Low temperature version down to -196 ° C
  • High temperature version up to +800 ° C
  • Heating jacket
  • Painting according to customer requirements
  • Special tests such as PMI, cryogenic, fire-safe, helium leak and dye penetrant test DPE

Are you looking for a special ball valve?

Our skilled sales team will be pleased to advise you on any technical options.